DSM 2060
This product from our product archive is no longer available to order.
This product is not currently available.
Digital speaker management system, configurable via software and at the device, 24-bit / 96-kHz converter, 2x XLR In to 6x XLR Out
Description
The HK AUDIO® DSM 2060 Digital Speaker Management System is a digital controller rich in practical features for both touring and fixed installations. With its innovative HFT™ Hardman Filter Technology, it exceeds standard requirements and offers the kind of high-end audio quality that until now could only be obtained from considerably higher priced units.
The HK AUDIO® DSM 2060 system incorporates high-end 24-bit, 96-kHz converters that ensure extremely accurate and natural digital signal processing and a frequency response up to 40 kHz. The two inputs and six outputs can be configured separately for front-of-house and monitor use in touring applications, and likewise allow for a great deal of flexibility in fixed installation projects. To best meet the needs of any given venue, you can apply as many as six parametric EQs plus two shelving filters to each input and output channel. To facilitate setup of delay zones and time alignment of loudspeaker components in multiamped systems, the DMS 2060 offers input delays up to 400 ms and output delays up to 80 ms. For greater speaker and driver protection different limiters can be applied to each output in steps as fine as 0.2 dB. Attack and release times of these limiters are optimally preconfigured. At the heart of the controller is a comprehensive set of crossover types, including Butterworth, Bessel, and Linkwitz- Riley, with selectable slopes from 6 to 24 dB. Unique to the HK AUDIO® DSM 2060 are the fourth-order and eighth-order HFT™ filters that create crossover slopes of 36 dB and 52 dB. But unlike other steeply sloped filters, the HFT™ crossover achieves absolutely minimal phase shift and group delay, even at maximum slopes, thereby maintaining an extraordinarily natural-sounding signal. As a result, HFT™ produces exceptionally smooth response in the crossover region and faster roll-off rates, which in turn minimise distortion, permit lower crossover frequencies and safely expand the effective frequency range of the drivers. This technology allows you to take maximum advantage of your sound system’s headroom and increase its operational reliability at the same time.
- Output impedance: 35 ohms, balanced to ground
- Frequency response: 10 Hz – 40 KHz, +/- 3 dB
- Limiters: High-perform. limiter, threshold adjustable in 0.2 dB steps
- Delay: Input 400 ms, Output 80
Techn. Data
Model | DSM 2060 |
Headline | Digital Speaker Management System |
Frequency response +/- 3 dB | 10 Hz - 40 kHz, +/- 3 dB |
Inputs | 2x In |
Outputs | 6x Out |
Filter type | IIR |
Max input (dBu) dynamics | >112 dB (A-weighted), 22 kHz Bandwidth |
Internal bit depth | 24 Bit |
Sampling rate | 96 kHz |
Protocol | AES 3 (AES/EBU) |
Delay | 400ms IN, 80ms OUT |
Network | 38,4 kBaud, Format: 8 Data, 1 Stop, no parity |
Max. input level | +20 dBu |
Max. output level | +22 dBu 600 Ohm |
Input impedance | 9 kOhm |
Output impedance | 35 Ohm |
Power consumption | 40 VA |
Mains voltage/ frequency | 100- 240 V / 50- 60 Hz |
Dimensions (WxHxD) | 48 x 4,4 x 25,4 cm (19") |
Weight | 2,7kg / 6,1 lbs. |
Downloads
Manuals |
|||
Manual DSM 2060/ Bedienungsanleitung DSM 2060 Version 1.0 |
2.98 MB | ![]() ![]() |
|
DSM 2060 Manual Podware |
80.1 KB | ![]() |
|
Filtersets |
|||
![]() |
DSM 2060 Filter IL Series VX 2400 |
812.09 KB | |
![]() |
DSM 2060 Filter CT / CTA for VX2400 |
998.85 KB | |
![]() |
DSM 2060 Filter CT / CTA for LAB FP 10000Q |
993.88 KB | |
![]() |
DSM 2060 Filter CADIS VX V03 |
550.21 KB | |
![]() |
DSM 2060 Filter CADIS CPQ_FP V03 |
0 Bytes | |
Controller Settings DSM 2060 |
|||
![]() |
DSM 2060 Firmware 1312V1340 |
137.89 KB | |
Brochures / Catalogs |
|||
![]() |
ProNews 2011 |
5.18 MB | ![]() |
![]() |
DSM 2060 Install Sound Datenblatt |
80.83 KB | ![]() |
![]() |
DSM 2060 Install Sound Datasheet |
160.22 KB | ![]() |
![]() |
DSM 2060 – Datenblatt |
160.22 KB | ![]() |
![]() |
DSM 2060 – Datasheet |
157 KB | ![]() |
Software/Drivers |
|||
![]() |
PodWare V5.81.0.zip |
4.67 MB | ![]() ![]() |
![]() |
BvNet USB Driver WIN XP/VISTA/7/8 |
2.1 MB | ![]() ![]() |
![]() |
BvNet USB Driver WIN 2000 |
1.2 MB | ![]() ![]() |